Impressora flexográfica Mark ANDY P5

MARK ANDY P5 – 430mm (8-colour)
8 Colour (Flexo)
Unwind
Rewind
ProLed System and Dryer
Die Cutting
BST Powerscope 5000 Inspectionsystem
Sheetingstation (Cross)
Delam/Relam
Cross cutting device
1 delivery belt
Mark Andy VPM 400 Panel Mount Machine
Meech web cleaning - double sided
2 PitStop trolleys to hold printing cylinder ink trays
Impression and magnetic cylinders
48 impression cylinders
7 magnetic cylinders
2 ink trays with non-stick coating
Servo-controlled feed unit with closed control loop
1 single-sided unwind for roll diameters up to 40 inches (1016mm)
Vertical dancer system
web edge control
closed control loop
1 ultrasonic web edge control with 2 sensors
1 ultrasonic web break control
Printing unit
Print and process maximum width 17 inches 431.8 mm
Maximum web width 17.25 inches 438.2 mm
Min. print processing width 8.5 in 216 mm
Min. print processing width with SK material 6.5 in 165 mm
Minimum print length 5.5 in. 139.7 mm
Maximum print length 24 inches 609.6 mm
Minimum die-cut length 10 in. 254 mm
Maximum die cut length 24 inches 609.6 mm
Tolerances print / print / die cut + - 0,1mm
Material Paper and adhesive laminate
PE
PET with liner
25 to 356 micron
Maximum mechanical speed 230m/min. The production speed to be production speed depends on the printing and die-cutting form and the output of the UV system
Connection 415 Volt
50 Hz system
Operating instructions in German
Toothing flexo printing unit 1/8 inch helical toothing
Punching station 1/8 inch straight toothing
Cross cutting station 1/8 inch straight toothing
This machine is equipped with a remote diagnostic system. To operate this system an internet connection must be provided to operate this system