Pasteurizador de leite Denkrom Tubular Pasteurizer novo

TEMPERATURE PROGRAM
PRODUCT INLET TEMPERATURE 20 C
PASTURIZED 90 C
PRODUCT OUTLET TEMPERATURE 15
C
DESIGN CRITERIA
Designed for pasteurizing fruit juice
AUTOMATION
PLC is automated PLC (Programmable
Logic Controller & Programmable
Controller) is a microprocessor-based
device that processes the information
received from the sensors according to the
program given to it and transfers it to the
work elements.
PLCs contribute greatly to production in
terms of production speed and automation
PLCs can control sequence, motion,
process control and can be used to collect
a wide variety of data
They are designed to prevent human
errors.
It is inevitable to be used to control errors
that will occur in production elements. PLC
process controls can be monitored and
controlled from different locations. It is
double automated.
1 37.500 37.500
EQUIPMENT
1)PLATFORM
Made of AISI 304 quality stainless steel
sheet and profile. Adjustable legs. Easy to
clean. The equipment to be used is
designed on the platform.
2)BALANCE TANK
Made of AISI 304 quality stainless steel
sheet.
product level is controlled by electric float.
3)BALANCE TANK PUMP
It is used for pumping liquid foods. Pump
capacity varies according to machine
capacity. Specially designed.
4)PASTEURIZER INLET VALVE
FLOWMETER
It is used to adjust the flow rate at the inlet
stage of the cip product according to the
pasteurizer program.
5 )PLATFORM
Made of AISI 304 quality stainless steel.
6 ) PIPES
Made of AISI 316 quality stainless steel.
7 )PT 100 TEMPERATURE SENSOR
2 units were used in the hot product section
and pasteurization outlet.
8 )PNEUMATIC CONTROLLED 3-WAY
VALVE (PRODUCT AUTOMATICS)
When the unpasteurized product falls
below the set temperature value, it sends it
back to the balance tank and ensures that it
is pasteurized.
9) HOT WATER PREPARATION UNIT
It provides heating of the product with
closed circuit hot water circulation.
10) PLATE HEAT EXCHANGER 1 PIECE
Provides heating of circulating water.
Gasketed. Easy disassembly and
assembly.
11) PROPORTIONAL CONTROLLED
STEAM VENTILATOR (DN 50): 4-20 MA 2
PCS
12) CONDENSSTOP 2 PCS
CHANDLED
13) HOT WATER CIRCULATION PUMP 1
PIECE
14) CLOSED EXPANSION VESSEL 1
PIECE
15) AIR CONDITIONER (AIR
CONVERTER) 1 PIECE
16) HOT WATER MONOMETER 1 PIECE
17) AIR PURIFIER 1PC
18) SAFETY VALVE
18) SAFETY VALVE 1 PIECE
19) STEAM VALVE 1 PIECE
20) FITNGS MATERIAL 1 SET
CONTROL PANEL 1 PIECE
1)PANEL
PUMP MOTOR CONTACTORS
INSURANCE
CABLES
AIR HOSES
OTHER NECESSARY ELECTRICAL
ACCESSORIES
2)TEMPERATURE CONTROL DEVICE 1
PIECE
PLC CONTROL PANEL 7 INCH TOUCH 1 PIECE